科研论文
1.
Li W, Zhao J, Wang Y, et al. Research on underwater flux cored arc cutting mechanism based on simulation of kerf formation[J]. Journal of Manufacturing Processes, 2019, 40: 169-177.
2.
Li W, Zhao J, Wang J, et al. Research on arc cutting mechanism and procedure of flux-cored cutting wire in water[J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(9-12): 2895-2904.
3.
Li W, Gao K, Wu J,等. Groove sidewall penetration modeling for rotating arc narrow gap MAG welding[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78 (1-4): 573-581.(SCI,EI)
4.
Li W, Gao K, Wu J,等. SVM-based information fusion for weld deviation extraction and weld groove state identification in rotating arc narrow gap MAG welding[J]. International Journal of Advanced Manufacturing Technology, 2014, 74(9-12): 1355-1364.(SCI,EI)
5.
Li W, Wu J, Hu T,等. Rough set based modeling for welding groove bottom state in narrow gap MAG welding[J]. Industrial Robot: An International Journal, 2015, 42(2): 110-116.(SCI,EI)
6.
Li W, Ji Y, Wu J,等. A modified welding image feature extraction algorithm for rotating arc narrow gap MAG welding[J]. Industrial Robot: An International Journal, 2015, 42 (3):222-227.(SCI,EI)
7.
黎文航,胡婷,刘川,等.旋转电弧窄间隙焊温度场和侧壁熔深的数值模拟[J].焊接学报, 2015, 36 (8):5-8.(EI)
8.
黎文航,孙丹丹,杨峰,等.基于粗糙集的窄间隙MAG焊缝偏差建模方法[J].焊接学报, 2013, 34 (5): 21-24.(EI)
9.
黎文航,李泽新,王俭辛,等.空气中的药芯割丝电弧切割机制[J].上海交通大学学报(自然科学版), 2016, 50 (10): 1597-1600.
10.
黎文航,高凯,王加友,等.窄间隙旋转电弧熔化极活性气体保护焊视觉焊缝偏差检测[J].上海交通大学学报(自然科学版), 2015, 49 (3): 353-356.(EI)
11.
Li W-H, Gao K, Wu J,等. Modeling Welding Deviation of Rotating Arc NGW Based on Support Vector Machine[J]. Advances in Intelligent Systems and Computing, 2015, 363: 459-468.(EI)
12.
黎文航,孙丹丹,杨峰,等.新型窄间隙MAG旋转电弧传感焊缝偏差提取算法,材料科学与工艺,2011,19(6):48-51(EI)
13.
Li W H, Li Q, Yang F. An intelligent modeling method for welding deviation of rotating arc NGW[J]. Applied Mechanics and Materials, 2013, (312): 805-809.(EI)
14.
黎文航,何金桥,杨峰,等.基于VB的旋转电弧MAG焊接测控系统开发[J].上海交通大学学报(自然科学版), 2012, 46 (sup1): 48-50.(EI)
15.
黎文航,王伟,王俭辛.水下药芯割丝电弧切割方法及工艺探讨[J].上海交通大学学报(自然科学版), 2012, 46 (sup.1): 117-119.(EI)
16.
黎文航,王加友.基于VC的旋转电弧窄间隙MAG焊多信息融合焊缝跟踪系统[J].焊接, 2014, (10): 30-33.
17.
黎文航,高凯,王加友.窄间隙MAG焊侧壁熔深信息的获取与同步化[J].电焊机, 2015, 45 (5): 146-149.
18.
周华,黎文航,张晨.基于RS232串行通信的温湿度—电参数仪同步采集系统开发[J].上海交通大学学报(自然科学版), 2012, 46 (sup1): 100-102.(EI,通讯作者)
19.
黎文航,杨峰,朱志愿,等.基于LabVIEW的高精度电阻温度法相变点测试仪研制[J]. 学报(自然科学版), 2010, 24 (6): 555-558.(EI)
20.
黎文航,杨峰,王加友.基于LabVIEW的虚拟仪器在焊接中的应用[J].焊接, 2009, (12): 54-57.
21.
黎文航,杨峰,王鑫,等.基于LabVIEW的焊接测控系统开发[J].上海交通大学学报, 2008, 42 (s1): 32-34.(EI)
22.
黎文航,陈善本,王加友,等.基于变精度粗糙集的脉冲GTAW过程建模方法[J].焊接学报, 2008, 29 (7): 57-63.(EI)
23.
Li W H, Chen S B, Wang B. A variable precision rough set based modeling method for pulsed GTAW[J]. International Journal of Advanced Manufacturing Technology, 2008, 36 (11-12): 1072-1079.(SCI,EI)
24.
Li W H, Chen S B, Lin T,等. A Generalized Rough Set Modeling Method for Welding Process[J]. Journal of Shanghai Jiaotong University, 2007, E-12 (3): 319-322.(EI)
25.
Li W H, Chen S B, Lin T. Discretiztion in rough set Modeling method for welding process[M].// Tarn, T-j,等. Robotic Welding, Intelligence and Automation. Berlin: Springer-Verlag Berlin, 2007: 325-331.(EI)
26.
黎文航,陈善本,林涛,等.离散化方法在基于粗糙集焊接建模中的比较[J].上海交通大学学报, 2006, 40 (7): 1094-1097.(EI)
教改论文
1.
黎文航. Multisim在材料加工专业单片机教学课程中的应用[J].中国科技创新导刊, 2013, (684): 147-149.
2.
黎文航,刘大双,陈书锦,等.基于RobotStudio的《机器人焊接技术》交互式仿真教学方法[J].课程教育研究—学法教法研究, 2015, (16): 31.
3.
黎文航,陈书锦,刘大双,等.《机器人焊接技术》新型教学体系探讨[J].课程教育研究—学法教法研究, 2015, (12): 27.
4.
黎文航,朱杰,陈书锦,等.新型《焊接机器人》本科教材的编制[J].机械制造文摘——焊接分册, 2015, (5): 42-44.
教材/专著
1.
黎文航,王加友,周方明.焊接机器人技术与系统[M].北京:国防工业出版社, 2015.